DAP VPA-250 250W/100 Volt Power Amplifier
artikelnr: D4143
- Merk:DAP
- Type:VPA-250 250W/100 Volt Power Amplifier
-
Levertijd:
OP=OP!
€ 315,00
Bestellen250W/100 Volt Power Amplifier
Features:
• Two microphone inputs, two auxiliary inputs and two AUX out for line.
• Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs.
• Muting function.
• Individual volume control and master volume control.
• Low and high tone control
• Output circuit shorting protection & alarm.
• Chime output.
Frontpanel:
• Power switch.
• Power indicator LED
• LED level meter
• Clip
• Z1 switch
• Z2 switch
• Z3 switch
• Z4 switch
• Master volume control
• Treble control
• Bass control
• AUX 2 volume control
• AUX 1 volume control
• MIC 2 volume control
• MIC 1 volume control
• MIC 2 input jack
• MIC 1 input jack
• Chime rest
Chime:
To further enhance the system a chime facility can be added as an option, the chime output can be activated by any input.
Specificaties
| Model: | VPA-60 VPA-150 VPA-250 |
| Output: | 60W 150W 250W |
| Output regulation: | Less than 3 dB, no load to full load |
| Speaker output: | Balanced 4-16 Ohm, 70V, 110V, 240V |
| AUX output: | 600 Ohm 1V (0 dBV) |
| Inputs: | Mic 1,2/600 Ohm, 2.0 mV (-54 dBV), unbalanced |
| AUX 1,2/10 kilo-Ohm, 250 mV (-10 dBV), unbalanced | |
| Freq. response 100 Hz-16 kHz | |
| Distortion: | Less than 0.1% at 1 kHz, 1/3 rated power |
| Signal to noise ratio: | Microphone 1,2 66 dB |
| AUX 1,2 70 dB | |
| Tone: | Bass: +- 10 dB at 100 Hz |
| Treble: | + -10 dB at 10 Hz |
| Protection: | AC fuse DC voltage, overload and short circuit. |
| Muting function: | Mic 1 overrides, other input signals with 0~-30 dB attenuation. |
| Power Requirements: | AC 220~240V/50~60 Hz |
| Power Consumption: | 100W 200W 320W |
| Dimensions: | 483 x 400 x 89 mm |
| Gross Weight: | 16 kg 20 kg 24 kg |